WOG-617
Empty Perforating Charge Case
Standalone empty outer casing for qualified oilfield perforating-system supply chains.
Specifications & details ↗Find the right starting point.
Search by product name or ID. Filter by category and product family.
240 products
WOG-601
Empty Perforating Gun Carrier
Outer mechanical carrier for oil- and gas-well perforating service in plug-and-perf completion.
Specifications & details ↗
WOG-618
Empty Perforating Gun Loading Tube
Inert mechanical support component supplied separately from the outer perforating gun carrier.
Specifications & details ↗
WOG-619
Perforating Gun Seal Kit
Replacement static seals for specified perforating-gun mechanical connections.
Specifications & details ↗
WOG-602
Perforating Gun Tandem Sub
Mechanical connection between compatible carrier sections.
Specifications & details ↗
WOG-603
Perforating Gun Bullnose
Lower-end mechanical closure and guidance for a compatible gun string.
Specifications & details ↗
WOG-604
Composite Frac Plug
Temporary stage isolation in cased-hole, multistage hydraulic fracturing of shale oil and gas wells.
Specifications & details ↗
WOG-605
Dissolvable Frac Plug
Temporary stage isolation in cased-hole, multistage hydraulic fracturing of shale oil and gas wells.
Specifications & details ↗
WOG-606
Composite Frac Ball
Ball-actuated isolation or sleeve activation in compatible completion tools.
Specifications & details ↗
WOG-607
Dissolvable Metal Frac Ball
Ball-actuated isolation or sleeve activation in compatible completion tools.
Specifications & details ↗
WOG-620
Frac Pump Valve Assembly
Replaceable wear component for reciprocating frac-pump fluid ends.
Specifications & details ↗
WOG-621
Frac Pump Valve Seat
Replaceable wear component for reciprocating frac-pump fluid ends.
Specifications & details ↗
WOG-622
Frac Pump Valve Spring
Replaceable wear component for reciprocating frac-pump fluid ends.
Specifications & details ↗
WOG-623
Frac Pump Plunger
Wear component transmitting reciprocating displacement in the frac-pump fluid end.
Specifications & details ↗
WOG-624
Frac Pump Plunger Packing Set
Dynamic sealing consumable for abrasive fracturing-fluid service.
Specifications & details ↗
WOG-625
Hammer Union Lip Seal
Replacement lip seal for the specified high-pressure hammer-union connection.
Specifications & details ↗
WOG-630
High-pressure Hammer Union
Detachable connection for compatible high-pressure well-service flowlines.
Specifications & details ↗
WOG-631
Integral Treating-iron Pup Joint
Straight high-pressure connection between treating-line components.
Specifications & details ↗
WOG-632
Treating-line Swivel Joint
Articulated connection for layout adjustment of high-pressure treating lines.
Specifications & details ↗
WOG-633
High-pressure Plug Valve
Isolation valve for compatible high-pressure fracturing and well-service lines.
Specifications & details ↗
WOG-634
Plug Valve Soft-seal Repair Kit
Scheduled replacement of soft seals in the selected high-pressure plug-valve family.
Specifications & details ↗
WOG-608
Ceramic Proppant
Supports fracture conductivity; select strength and density for the designed closure stress.
Specifications & details ↗
WOG-609
Resin-coated Sand Proppant
Supports fracture conductivity; curable grades can help control proppant flowback.
Specifications & details ↗
WOG-610
Bow-spring Casing Centralizer
Maintains casing standoff for cement placement in suitable well sections.
Specifications & details ↗
WOG-611
Rigid Spiral-blade Casing Centralizer
Provides fixed standoff where rigid centralizers can pass the wellbore restrictions.
Specifications & details ↗
WOG-612
Set-screw Casing Stop Collar
Axially locates compatible casing centralizers and selected cementing accessories.
Specifications & details ↗
WOG-613
Casing Float Shoe
Guides the casing end and limits cement backflow after displacement.
Specifications & details ↗
WOG-614
Casing Float Collar
Provides a backflow check and landing location within the casing cementing system.
Specifications & details ↗
WOG-615
Top Cementing Wiper Plug
Separates displacement fluid from cement and wipes the casing interior.
Specifications & details ↗
WOG-616
Bottom Cementing Wiper Plug
Separates cement from preceding fluid and permits through-flow after landing.
Specifications & details ↗
WOG-187
Two-piece Threaded Ball Valve
Quarter-turn isolation of compatible liquid or gas lines.
Specifications & details ↗
WOG-191
Needle Valve
Fine flow adjustment and isolation in small-bore instrument and sampling lines.
Specifications & details ↗
WOG-437
Three-piece Threaded Ball Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-438
Three-way Threaded Ball Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-188
Flanged Gate Valve
On/off isolation in production-water and utility piping; qualify the selected body and trim for hydrocarbon service.
Specifications & details ↗
WOG-323
Flanged Globe Valve
Isolation and controlled throttling on suitable oil, gas and utility piping.
Specifications & details ↗
WOG-439
Forged Steel Gate Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-440
Forged Steel Globe Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-189
Dual-plate Wafer Check Valve
Automatic reverse-flow prevention in compatible process and utility lines.
Specifications & details ↗
WOG-324
In-line Spring Check Valve
Compact non-return protection in small-bore liquid or gas service.
Specifications & details ↗
WOG-325
Flanged Swing Check Valve
Prevent reverse flow in compatible process and utility lines.
Specifications & details ↗
WOG-441
Forged Steel Piston Check Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-443
Suction Foot Valve with Strainer
Maintain pump prime in compatible clean-water or utility-liquid suction service. Select screen area for available suction head.
Specifications & details ↗
WOG-190
Wafer Butterfly Valve
Quarter-turn isolation in water and compatible utility service.
Specifications & details ↗
WOG-192
Pneumatically Actuated Butterfly Valve
Remote on/off control of water or compatible utility fluids.
Specifications & details ↗
WOG-442
Lug-style Butterfly Valve
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-326
Threaded Y-strainer
Remove coarse debris ahead of pumps, valves and instruments.
Specifications & details ↗
WOG-327
Flanged Simplex Basket Strainer
Liquid filtration for produced-water pretreatment, pump protection and chemical-service side streams.
Specifications & details ↗
WOG-444
Flanged Y-strainer
Standard isolation, flow-direction or straining functions in production-fluid and utility piping.
Specifications & details ↗
WOG-501
Spring-loaded Back Pressure Regulator
Maintain upstream pressure on a defined production gas or liquid service, such as separator outlet or compatible liquid control lines.
Specifications & details ↗
WOG-193
Oilfield Suction & Discharge Hose
Transfer compatible drilling fluids and production liquids using a fluid-specific hose grade.
Specifications & details ↗
WOG-354
Braided Corrugated Metal Hose
Accommodate vibration and defined movement on pump and process connections.
Specifications & details ↗
WOG-503
Oilfield Vacuum Suction Hose
Transfer compatible oilfield waste liquids and non-refined petroleum in vacuum service.
Specifications & details ↗
WOG-504
TPU Layflat Water-transfer Hose
High-volume water transfer to frac sites and between water storage locations.
Specifications & details ↗
WOG-413
Type A Cam-and-groove Adapter
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-414
Type B Cam-and-groove Coupler
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-415
Type C Cam-and-groove Hose Coupler
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-416
Type D Cam-and-groove Coupler
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-417
Type E Cam-and-groove Hose Adapter
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-418
Type F Cam-and-groove Adapter
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-419
Cam-and-groove Dust Cap
Protects disconnected cam-and-groove interfaces from dirt during storage and transport.
Specifications & details ↗
WOG-420
Cam-and-groove Dust Plug
Protects disconnected cam-and-groove interfaces from dirt during storage and transport.
Specifications & details ↗
WOG-421
Cam-and-groove Gasket
Low-pressure liquid transfer for water, compatible chemicals and petroleum service hoses.
Specifications & details ↗
WOG-422
T-bolt Hose Clamp
Standard catalogue hardware for hose retention or pipe support at field installations.
Specifications & details ↗
WOG-423
Worm-drive Hose Clamp
Standard catalogue hardware for hose retention or pipe support at field installations.
Specifications & details ↗
WOG-195
Weld-neck Flange
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-301
Slip-on Flange
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-302
Blind Flange
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-303
Socket-weld Flange
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-304
Lap-joint Flange & Stub End
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-305
Threaded NPT Flange
Connect or close process piping, pump packages and gas-treatment modules.
Specifications & details ↗
WOG-196
90-degree Butt-weld Elbow
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-197
Butt-weld Equal Tee
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-198
Concentric Butt-weld Reducer
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-306
45-degree Butt-weld Elbow
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-307
Eccentric Butt-weld Reducer
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-308
Butt-weld Pipe Cap
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-309
Butt-weld Reducing Tee
Route, reduce, branch or close welded oil, gas and utility piping.
Specifications & details ↗
WOG-310
Socket-weld 90-degree Elbow
Compact welded branches and connections on small-bore process piping.
Specifications & details ↗
WOG-311
Socket-weld Equal Tee
Compact welded branches and connections on small-bore process piping.
Specifications & details ↗
WOG-312
Socket-weld Full Coupling
Compact welded branches and connections on small-bore process piping.
Specifications & details ↗
WOG-411
Socket-weld Pipe Cap
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-412
Socket-weld Pipe Union
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-199
NPT Full Coupling
Threaded instrument take-offs, drains, vents and small-bore process connections.
Specifications & details ↗
WOG-313
NPT Hex Nipple
Threaded instrument take-offs, drains, vents and small-bore process connections.
Specifications & details ↗
WOG-314
NPT Three-piece Pipe Union
Threaded instrument take-offs, drains, vents and small-bore process connections.
Specifications & details ↗
WOG-315
NPT Female Equal Tee
Threaded instrument take-offs, drains, vents and small-bore process connections.
Specifications & details ↗
WOG-316
NPT Hex-head Plug
Threaded instrument take-offs, drains, vents and small-bore process connections.
Specifications & details ↗
WOG-405
NPT Reducing Coupling
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-406
NPT Hex Reducing Bushing
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-407
NPT 90-degree Street Elbow
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-408
NPT Half Coupling
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-409
Threaded Pipe Nipple
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-410
Forged NPT Cross
Compact standard connections for process piping, utility lines and oilfield maintenance.
Specifications & details ↗
WOG-341
Stud Bolt & Heavy Hex Nut Set
Repeatable bolting kits for flanges, valve bonnets and pressure assemblies.
Specifications & details ↗
WOG-346
U-bolt Pipe Clamp
Modular pipe supports for process skids, racks and utility lines.
Specifications & details ↗
WOG-347
Adjustable Clevis Pipe Hanger
Modular pipe supports for process skids, racks and utility lines.
Specifications & details ↗
WOG-348
Threaded-rod Beam Clamp
Modular pipe supports for process skids, racks and utility lines.
Specifications & details ↗
WOG-349
Two-bolt Riser Clamp
Modular pipe supports for process skids, racks and utility lines.
Specifications & details ↗
WOG-426
Split-ring Pipe Hanger
Standard catalogue hardware for hose retention or pipe support at field installations.
Specifications & details ↗
WOG-427
Strut-channel Pipe Clamp
Standard catalogue hardware for hose retention or pipe support at field installations.
Specifications & details ↗
WOG-328
Single-bag Filter Housing
Liquid filtration for produced-water pretreatment, pump protection and chemical-service side streams.
Specifications & details ↗
WOG-329
Multi-cartridge Filter Housing
Liquid filtration for produced-water pretreatment, pump protection and chemical-service side streams.
Specifications & details ↗
WOG-317
Compression Tube Union
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-318
Compression Tube Union Elbow
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-319
Compression Tube Union Tee
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-320
Tube-to-Male NPT Connector
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-321
Bulkhead Tube Union
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-322
Reducing Tube Union
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-353
Seamless Instrument Tubing Coil
Instrument impulse lines, sample lines and compact chemical-feed piping.
Specifications & details ↗
WOG-357
Bulkhead Tube Union Elbow
Instrument impulse lines, gas sampling and small-volume chemical injection.
Specifications & details ↗
WOG-428
Tube-to-Female NPT Connector
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-429
Tube-to-Male NPT Elbow
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-430
Tube-to-Female NPT Elbow
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-431
Tube-to-Male NPT Branch Tee
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-432
Compression Tube Cap
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-433
Tube-fitting Port Plug
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-336
Liquid-filled Bourdon Pressure Gauge
Local indication on gas, liquid, pump and chemical-injection lines.
Specifications & details ↗
WOG-337
Threaded Bar-stock Thermowell
Protect temperature sensors on oil, gas and process-liquid piping.
Specifications & details ↗
WOG-434
Pressure Gauge Snubber
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-435
Pressure Gauge Siphon
Protect a pressure instrument on suitable steam or hot-fluid utility service using an approved siphon installation.
Specifications & details ↗
WOG-436
Bimetal Dial Thermometer
Connections and accessories for pressure, temperature and sampling instrumentation on oil and gas facilities.
Specifications & details ↗
WOG-338
Two-valve Block-and-bleed Manifold
Isolate and vent a pressure instrument through a two-valve circuit.
Specifications & details ↗
WOG-339
Three-valve Differential-pressure Manifold
Isolate and equalize instruments for pressure or differential-pressure measurement.
Specifications & details ↗
WOG-340
Five-valve Differential-pressure Manifold
Isolate and equalize instruments for pressure or differential-pressure measurement.
Specifications & details ↗
WOG-331
Fixed NPT Injection Quill
Inject corrosion inhibitor, scavenger or process chemicals into a flowing stream.
Specifications & details ↗
WOG-332
Metering Pump Calibration Column
Check metering-pump delivery and repeatability using a measured drawdown.
Specifications & details ↗
WOG-333
Diaphragm Pulsation Dampener
Reduce metering-pump discharge pulsation using a correctly sized diaphragm chamber.
Specifications & details ↗
WOG-334
Diaphragm Back-pressure Valve
Maintain controlled back pressure for stable chemical-metering operation.
Specifications & details ↗
WOG-335
Chemical Dosing Relief Valve
Bypass excess chemical-feed pressure to a safe return within the selected valve limits.
Specifications & details ↗
WOG-355
Pneumatic Chemical Metering Pump
Deliver controlled low-volume chemical injection using a pneumatic drive.
Specifications & details ↗
WOG-471
Threaded Oil-level Sight Glass
Visual oil-level checks on catalogue-rated pump and auxiliary lubrication housings.
Specifications & details ↗
WOG-500
Horizontal Oil Level Switch
Point-level indication for auxiliary oil reservoirs around production equipment.
Specifications & details ↗
WOG-211
Gas Coalescing Filter Element
Remove entrained liquid aerosols from natural gas after bulk liquid separation.
Specifications & details ↗
WOG-212
Dry Gas Particulate Filter Element
Remove solid contaminants from gas before sensitive downstream equipment.
Specifications & details ↗
WOG-213
Gas Filter-separator Element
First-stage gas solids filtration and liquid coalescence in a compatible filter-separator.
Specifications & details ↗
WOG-502
Compact Sweet-gas Filter
Remove particles or liquid aerosols from compatible sweet-gas and instrument-gas lines.
Specifications & details ↗
WOG-225
Cotton-wound Glycol Filter Cartridge
Remove solid particles from circulating TEG in a natural-gas dehydration unit; select media and core for the actual glycol temperature.
Specifications & details ↗
WOG-231
Molecular Sieve 3A
Adsorb water or selected small molecules in gas-treatment beds; select pore size for the intended separation.
Specifications & details ↗
WOG-232
Molecular Sieve 4A
Adsorb water or selected small molecules in gas-treatment beds; select pore size for the intended separation.
Specifications & details ↗
WOG-233
Molecular Sieve 13X
Adsorb water or selected small molecules in gas-treatment beds; select pore size for the intended separation.
Specifications & details ↗
WOG-234
Activated Alumina
Water adsorption in compatible gas-drying beds, using the selected alumina grade and regeneration cycle.
Specifications & details ↗
WOG-235
Silica Gel
Moisture adsorption in compatible gas and air drying systems.
Specifications & details ↗
WOG-247
Iron-based H2S Scavenging Pellets
Fixed-bed hydrogen sulfide removal using a selected iron-based reactive medium.
Specifications & details ↗
WOG-249
H2S-removal Activated Carbon Pellets
Fixed-bed H2S removal with a qualified impregnated or catalytic carbon grade.
Specifications & details ↗
WOG-342
Braided PTFE Gland Packing
Valve-stem and pump-gland maintenance in oil, gas and utility services.
Specifications & details ↗
WOG-343
Braided Graphite Gland Packing
Valve-stem and pump-gland maintenance in oil, gas and utility services.
Specifications & details ↗
WOG-448
AS568 O-ring Assortment
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-449
PTFE Back-up Ring
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-450
Bonded Sealing Washer
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-054
Spiral-wound Flange Gaskets
Seal standardized flanged oil, gas and process-piping joints.
Specifications & details ↗
WOG-344
Octagonal Ring-joint Gasket
Seal flanged oil/gas joints; insulation kits also electrically isolate bolted joints.
Specifications & details ↗
WOG-345
Kammprofile Gasket
Seal flanged oil/gas joints; insulation kits also electrically isolate bolted joints.
Specifications & details ↗
WOG-350
Flange Insulation Gasket Kit
Seal flanged oil/gas joints; insulation kits also electrically isolate bolted joints.
Specifications & details ↗
WOG-445
Oval Ring-joint Gasket
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-446
Compressed Non-asbestos Gasket Sheet
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-447
Expanded PTFE Gasket Sheet
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-041
Polypropylene Melt-blown Depth Cartridge
Melt-blown Cartridge Filter Element for produced water filtration & maintenance.
Specifications & details ↗
WOG-042
Pleated Liquid Filter Element
Pleated Liquid Filter Element for produced water filtration & maintenance.
Specifications & details ↗
WOG-043
Felt Liquid Filter Bag
Bag Filter for produced water filtration & maintenance.
Specifications & details ↗
WOG-330
High-flow Pleated Cartridge
High-volume produced-water polishing and process-liquid filtration.
Specifications & details ↗
WOG-400
String-wound Depth Cartridge
Particle or free-oil removal in produced-water, completion-fluid and process-liquid service.
Specifications & details ↗
WOG-401
Pleated Stainless Steel Filter Cartridge
Particle or free-oil removal in produced-water, completion-fluid and process-liquid service.
Specifications & details ↗
WOG-402
Sintered Metal Powder Filter Element
Particle or free-oil removal in produced-water, completion-fluid and process-liquid service.
Specifications & details ↗
WOG-403
Nylon Monofilament Filter Bag
Particle or free-oil removal in produced-water, completion-fluid and process-liquid service.
Specifications & details ↗
WOG-404
Oil-absorbing Liquid Filter Bag
Captures dispersed free oil in water circuits; dissolved hydrocarbons and stable emulsions require other treatment.
Specifications & details ↗
WOG-046
Woven Metal Mesh Screen
Woven Metal Mesh Screen for produced water filtration & maintenance.
Specifications & details ↗
WOG-048
Granular Activated Carbon Media
Produced Water Filtration & Maintenance applications; qualify treatment with representative field fluids.
Specifications & details ↗
WOG-451
Push-in Flange Protector
Repeat-purchase sealing and protection products for standard piping and maintenance interfaces.
Specifications & details ↗
WOG-467
Oil-only Absorbent Pad
Routine spill response and lubricant-condition maintenance around pumps, tanks and production equipment.
Specifications & details ↗
WOG-468
Oil-only Absorbent Boom
Routine spill response and lubricant-condition maintenance around pumps, tanks and production equipment.
Specifications & details ↗
WOG-469
Granular Clay Absorbent
Routine spill response and lubricant-condition maintenance around pumps, tanks and production equipment.
Specifications & details ↗
WOG-113
Liquid Friction Reducer
Reduce frictional pressure losses during water-based hydraulic fracturing.
Specifications & details ↗
WOG-117
Dry Friction Reducer
Dry polymer for preparing water-based friction-reducing treatment fluids.
Specifications & details ↗
WOG-360
High-viscosity Friction Reducer (HVFR)
Reduce pumping friction in water-based stimulation fluids; evaluate hydration and friction response in the actual water.
Specifications & details ↗
WOG-363
Brine-tolerant Friction Reducer
Reduce pumping friction in water-based stimulation fluids; evaluate hydration and friction response in the actual water.
Specifications & details ↗
WOG-140
Guar-based Gelling Agent
Build viscosity in compatible water-based stimulation fluids.
Specifications & details ↗
WOG-626
Borate Crosslinker
Crosslinks compatible guar-based fluids for selected hybrid or gel-based fracturing programs.
Specifications & details ↗
WOG-132
Breaker
Reduce residual polymer viscosity after the planned stimulation treatment.
Specifications & details ↗
WOG-627
Encapsulated Oxidizing Breaker
Delayed breaker addition for compatible polymer-based fracturing fluids.
Specifications & details ↗
WOG-130
Clay Stabilizer
Limit clay swelling or fines migration in compatible treatment fluids.
Specifications & details ↗
WOG-121
Nonionic Surfactant
Modify wetting and interfacial behavior in stimulation or production fluids.
Specifications & details ↗
WOG-119
Flowback Surfactant
Reduce interfacial tension and support fluid recovery after stimulation.
Specifications & details ↗
WOG-138
Completion Non-emulsifier
Limit persistent emulsions when completion or stimulation fluids contact crude oil.
Specifications & details ↗
WOG-133
Chelating Iron-control Additive
Keep dissolved iron controlled during compatible acidizing and cleanup treatments.
Specifications & details ↗
WOG-628
Degradable Particulate Diverter
Temporary diversion material for selected stimulation or refracturing treatments.
Specifications & details ↗
WOG-629
Degradable Fiber Diverter
Temporary diversion material for selected stimulation or refracturing treatments.
Specifications & details ↗
WOG-456
Potassium Chloride
Potassium source for clay-sensitive water-based fluids.
Specifications & details ↗
WOG-457
Sodium Chloride Completion Salt
Preparation and salinity adjustment of completion and workover brines.
Specifications & details ↗
WOG-458
Calcium Chloride Completion Brine
Solids-free completion and workover fluid within the validated density range.
Specifications & details ↗
WOG-459
Calcium Bromide Completion Brine
Higher-density solids-free completion and workover service.
Specifications & details ↗
WOG-464
Sodium Bromide Completion Salt
Preparation of bromide completion brines at the specified density and temperature.
Specifications & details ↗
WOG-142
Bicarbonate Buffer / pH Additive
Adjust alkalinity or bicarbonate balance in compatible drilling-fluid systems.
Specifications & details ↗
WOG-460
Citric Acid Iron-control Ingredient
Iron complexing and cleaning formulations after fluid-compatibility testing.
Specifications & details ↗
WOG-461
Sulfamic Acid Descaling Ingredient
Preparation of compatible scale-removal solutions with qualified corrosion control.
Specifications & details ↗
WOG-162
Polyamine Shale Inhibitor
Limit shale hydration and dispersion in water-based drilling muds.
Specifications & details ↗
WOG-163
Liquid Drilling Lubricant
Reduce torque and drag in qualified water-based drilling fluids.
Specifications & details ↗
WOG-164
PAC Fluid-loss Control Additive
Control filtrate loss in compatible water-based drilling fluids.
Specifications & details ↗
WOG-166
PHPA / Partially Hydrolyzed Polyacrylamide
Encapsulate cuttings and support shale inhibition in water-based muds.
Specifications & details ↗
WOG-168
CMC / Carboxymethyl Cellulose
Control drilling-fluid filtration and viscosity by selected grade.
Specifications & details ↗
WOG-169
Xanthan Gum
Improve low-shear suspension in compatible drilling or completion fluids.
Specifications & details ↗
WOG-455
Attapulgite Viscosifier
Suspension and cuttings transport in saltwater muds; filtration control is separate.
Specifications & details ↗
WOG-161
Cellulose Lost Circulation Material
Fibrous bridging material for reducing drilling-fluid losses.
Specifications & details ↗
WOG-171
Graphite Bridging Material
Provide deformable bridging particles for lost-circulation treatments.
Specifications & details ↗
WOG-173
Nut Shell LCM
Provide granular bridging in drilling-fluid lost-circulation blends.
Specifications & details ↗
WOG-174
Asphaltite / Gilsonite
Asphaltic additive for selected shale-stability and filtration programs.
Specifications & details ↗
WOG-175
Calcium Carbonate Bridging Material
Sized acid-soluble bridging particles for drilling and completion fluids.
Specifications & details ↗
WOG-185
Barite Weighting Agent
Increase drilling-fluid density using a qualified ground barite grade.
Specifications & details ↗
WOG-452
Drilling-grade Bentonite
Freshwater mud viscosity and filtercake building.
Specifications & details ↗
WOG-453
Hematite Weighting Agent
High-density drilling fluids where solids loading and abrasion are controlled.
Specifications & details ↗
WOG-454
Mica Flake Lost Circulation Material
Flake bridging material for loss-control blends and pills.
Specifications & details ↗
WOG-462
Soda Ash Alkalinity Agent
Alkalinity adjustment and calcium precipitation in water-based mud preparation.
Specifications & details ↗
WOG-463
Caustic Soda Beads
Alkalinity and pH adjustment in compatible drilling or process-fluid systems.
Specifications & details ↗
WOG-180
Cement Accelerator
Accelerate cement hydration in qualified well-cementing systems.
Specifications & details ↗
WOG-182
Cement Defoamer
Reduce entrained air and foam during cement-slurry mixing.
Specifications & details ↗
WOG-183
Latex Additive
Modify cement-slurry properties using a qualified latex grade.
Specifications & details ↗
WOG-186
Cement Lightweight / Extender Additive
Reduce slurry density or extend yield in qualified cement formulations.
Specifications & details ↗
WOG-465
Sodium Gluconate Cement Retarder
Cement-slurry retardation after testing with the actual cement and temperature.
Specifications & details ↗
WOG-466
Sulfonated Naphthalene Cement Dispersant
Cement-slurry dispersion and water-demand reduction after slurry qualification.
Specifications & details ↗
WOG-127
Water-soluble Production Corrosion Inhibitor
Reduce corrosion under the defined fluid, temperature and flow conditions.
Specifications & details ↗
WOG-505
Oil-soluble Production Corrosion Inhibitor
Protect wetted metal in suitable oil-dominant production and gathering systems.
Specifications & details ↗
WOG-126
Phosphonate Scale Inhibitor
Control mineral deposition; select active chemistry for the actual ions and saturation tendency.
Specifications & details ↗
WOG-506
Polymeric Scale Inhibitor
Control selected mineral scale in produced-water and injection systems.
Specifications & details ↗
WOG-139
Oxygen Scavenger
Remove dissolved oxygen from compatible injection water or completion brines.
Specifications & details ↗
WOG-128
Crude-oil Demulsifier
Promote separation of oil-water emulsions; qualify by bottle testing with representative crude.
Specifications & details ↗
WOG-507
Produced-water Reverse Demulsifier
Destabilize oil-in-water emulsions before produced-water separation.
Specifications & details ↗
WOG-136
Paraffin Inhibitor
Control wax deposition in crude-oil production and gathering.
Specifications & details ↗
WOG-361
Crude-oil Pour-point Depressant
Improve low-temperature crude handling by modifying wax-crystal behavior.
Specifications & details ↗
WOG-362
Asphaltene Dispersant
Limit asphaltene aggregation and deposition during production or crude blending.
Specifications & details ↗
WOG-134
Oilfield Defoamer
Control unwanted foam in the specified aqueous or process system; check downstream separation compatibility.
Specifications & details ↗
WOG-129
PolyDADMAC Water Clarifier / Coagulant
Coagulate dispersed contaminants before produced-water clarification.
Specifications & details ↗
WOG-157
Polyacrylamide Flocculant
Flocculate suspended solids in produced-water and drilling-wastewater treatment.
Specifications & details ↗
WOG-237
Gas-well Liquid Foamer
Assist liquid unloading in gas wells through controlled foam generation.
Specifications & details ↗
WOG-239
High-salinity Gas-well Foamer
Support gas-well unloading where high-salinity brines limit conventional foamers.
Specifications & details ↗
WOG-238
Solid Foamer Stick
Solid foamer for assisted liquid unloading in compatible gas wells.
Specifications & details ↗
WOG-159
Triazine-based H2S Scavenger
React with hydrogen sulfide in a specified contact system; control dosage, residence time and spent-fluid handling.
Specifications & details ↗
WOG-224
TEG / Triethylene Glycol
Absorb water vapor in glycol-based natural-gas dehydration units.
Specifications & details ↗
WOG-230
Glycol Defoamer
Control unwanted foam in the specified aqueous or process system; check downstream separation compatibility.
Specifications & details ↗
WOG-250
Methanol
Thermodynamic hydrate inhibition in compatible gas-production service.
Specifications & details ↗
WOG-251
MEG / Monoethylene Glycol
Thermodynamic hydrate inhibition in suitable gas gathering systems.
Specifications & details ↗No matching products. Try another term or reset filters.